Affordable American Made Feeder Solutions, On The Post Products is a family-owned business located in the scenic region of East Central Ohio, near Canton.
Our mission is simple: To provide our customers with top-quality, durable hunting and agriculture equipment with a range of other premium products.
Driven by our passion for crafting reliable and affordable solutions, we established On The Post Products with a clear vision.
Every product we create is proudly made and created in the USA.
Most asked questions related to the Teeder 50
No. Presently the Teeder 50 can either be mounted using a T-Post or with the included Tree Mount (TF50TM) with the customer supplied strap. See our support page for more details.
After attaching the supplied Tree Mount (TF50TM) to any side of the Teeder 50, using a ratchet strap, feed it through the slot between the Tree Mount and Teeder Bucket and around the tree and ratchet it tight. See our support page for more details.
We recommend using a standard 6-foot heavy-duty T-Post that is driven into the ground a minimum of 24 to 28 inches. You should consult with 811 prior to installation to verify there are not any utilities in the area. See our support page for more details.
You will need a ratchet strap that is typically used in moving, appliances, and small equipment. The strap width should be 1 to 2 inch maximum to fit through the slot on the Tree Mount and no more than 1/4 inch thick. See our support page for more details.
No. Unfortunately the Teeder 50# Topper extends to far to allow for the Teeder 50 Lid to properly fit. See our support page for more details.
